Vectorply exhibiting at CAMX next week

PHENIX CITY, Ala. – Following postponement due to Hurricane Irma in September, the Composites and Advanced Materials Expo (CAMX) will take place December 12-14 at the Orange County Convention Center in Orlando, FL. Vectorply Corporation will be in attendance as one of the anticipated 550 exhibitors, and we invite you to visit us at booth […]

Vectorply hosts Leadership Phenix City class

Vectorply Corporation hosted the Phenix City-Russell County Chamber of Commerce Leadership Phenix City class on Wednesday, October 18. Attendees were able to learn about the company’s history and future, and tour the facilities, including the recently added Donald L. Massey Advanced Composite Reinforcement Center.  

CAMX show cancelled, Vectorply still planning to exhibit at IBEX

PHENIX CITY, Ala. –  Due to the imminent threat of Hurricane Irma in Florida, CAMX show officials announced Thursday that the 2017 show in Orlando next week has been postponed. At this time, Vectorply Corporation is still planning to exhibit at IBEX September 19-21, 2017 at the Tampa Convention Center in Tampa, FL. Our thoughts […]

Vectorply Corporation exhibiting at CAMX and IBEX next month

PHENIX CITY, Ala. – In September, Vectorply Corporation will be exhibiting at the Composites and Advanced Materials Expo (CAMX) and the International Boatbuilders’ Exhibition and Conference (IBEX). The CAMX 2017 show will take place September 11-14, 2017 at the Orange County Convention Center in Orlando, FL. The goal of CAMX is to “connect and advance […]

Vectorply Corporation commissions Advanced Composite Reinforcement Center with Grand Opening Ceremony

Phenix City, AL – Vectorply Corporation, a Phenix City, Ala.-based manufacturer of high performance composite non-crimp fabrics (NCF), officially opened the doors of their new Advanced Composite Reinforcement Center with a Grand Opening Ceremony in front of friends, customers, and suppliers on Wednesday, June 14, 2017. The new 53,000 sq. ft. (5,000 sq.m.) facility features […]

Vectorply adds Composite Test Engineer Leigh Nolen

Vectorply Corporation is proud to announce Leigh Nolen as the newest member to our Technical Services and Engineering department, taking on the position title of Composite Test Engineer.  Nolen earned a Bachelor of Science in Mechanical Engineering Degree from the University of Alabama at Birmingham in May 2006, and a Master’s of Science, Materials Science and […]

United States Senator Richard Shelby visits Vectorply

Phenix City, Ala. – On Saturday, March 25th, United States Senator Richard Shelby of Alabama visited Vectorply Corporation as part of his tour of Alabama businesses. Senator Shelby discussed several topics with members of Vectorply’s management team including the use of composites in the infrastructure, pipe, and defense markets.

VectorLam Cirrus 2.0 updates released

VectorLam Cirrus 2.0 is a laminate analysis and design tool created by high performance composite reinforcement manufacturer Vectorply Corporation (Phenix City, Ala.). With the most recent software update, VectorLam has added vital alert massages along with new features to improve the user experience. Below are some of the new features: Materials can now be deleted. […]

Advanced Composites Business Development Manager

Vectorply Corporation, a leader in the development, production and distribution of high performance composite reinforcement fabrics is seeking to hire an experienced executive to lead new business development for the expanding advanced composites reinforcement product line. The primary responsibility of the position is to identify potential customers, develop relationships, and assist Vectorply sales and engineering […]

Advanced Composite Reinforcement Center on track to open this spring

PHENIX CITY, Ala. – Vectorply Corporation’s Advanced Composite Reinforcement Center (ACRC) and corporate offices are scheduled to open this spring. The gallery below highlights the latest pictures of the construction progress. Follow us for more updates on the construction of our new facility and grand opening information.

Vectorply to highlight VectorUltra products at CAMX, IBEX

PHENIX CITY, Ala. – Vectorply Corporation will showcase its full VectorUltra™ line of carbon multiaxial fabrics September 26-29 in Anaheim, CA at the Composites and Advanced Materials Expo (CAMX) 2016. Vectorply’s standard VectorUltra products are offered in unidirectional, biaxial, double-bias, triaxial, quadraxial, and multilayered architectures ranging from 3 oz./yd.² (100 gsm) to 94 oz./yd.² (3,193 […]

Composites One visits Vectorply for BOI meeting

On August 2-3, Vectorply hosted distributor Composites One for a Business Optimization Initiative (BOI) meeting. The two-day meeting covered a wide range of topics focused on improving efficiency as we strive to always keep our collective customers happy!

Construction begins on Vectorply’s Advanced Composites Facility

PHENIX CITY, Ala. – Vectorply Corporation announced in February at the company’s National Sales Meeting that the addition of a new Advanced Composites Facility would begin during the spring. With the site preparation completed, foundation construction began this week as the first concrete footings were poured. Check back at for more news and updates about […]

Successful composite products begin with Vectorply’s R2O

Phenix City, Ala. – In an industry as competitive as composites fabrication, any edge that manufacturers can gain has the potential to pay huge dividends. As numerous customers have already discovered, Vectorply’s powerful tool known as the Road to Optimization (R2O) can identify key areas for improvement in the production process leading to higher quality […]

Vectorply composites strengthen Hale Boggs Memorial Bridge

Destrehan, LA – Spanning the Mississippi River to connect Destrehan on the east bank to Luling on the west bank, the Hale Boggs Memorial Bridge (also known as the Luling Bridge) is one of the state of Louisiana’s most crucial pieces of infrastructure.  With the bridge in need of surface repairs, the Louisiana Department of […]

U.S. Coast Guard marine inspectors train with Vectorply carbon

Richmond, CA – Maritime Technical Services of Tiburon, CA recently completed their 15th training course designed to teach United States Coast Guard marine inspectors how to inspect composite small passenger vessels.  The course is held three times a year at the KKMI Boathouse in Point Richmond, CA and consists of 20 students. The course covers several […]

VectorLam Cirrus 2.0 Introductory Webinar (video)

Vectorply Corporation Director of Composites Engineering, Trevor Gundberg, P.E. leads an introductory webinar for VectorLam Cirrus 2.0. Cirrus 2.0 is the latest edition of Vectorply’s proprietary laminate analysis software. View the video below for the full-length webinar, or follow the link on our home page to register for VectorLam Cirrus 2.0 for free! Note: For the […]

Viking Yachts 80’ Convertible brought to life with help from Vectorply’s Road to Optimization

PHENIX CITY, Ala. – The unveiling of Viking Yachts’ 80’ Convertible (80C) at the company’s annual dealer meeting in Atlantic City, N.J. marked the successful end of a well-planned journey for the new model. As the 80C navigated the water for sea trials in front of nearly 100 Viking dealers, history had once again been […]

Vectorply adds 100″ multiaxial machine

Vectorply Corporation recently expanded its manufacturing capabilities with the installation of a 100” multiaxial Karl Mayer LIBA COPCENTRA Max 4 machine. The new state-of-the-art Max 4 machine will help Vectorply continue to meet and exceed the needs of our customers with high-quality composite reinforcements delivered on time. For more information on Vectorply fabrics, call us […]

Vectorply unveiling new technology at CAMX

PHENIX CITY, Ala. – Vectorply Corporation is excited to announce the release of VectorLam Cirrus 2.0 at the Composites and Advanced Materials Expo (CAMX) on October 26-29, 2015 at the Dallas Convention Center in Dallas, Texas. VectorLam Cirrus 2.0 is the latest edition of Vectorply’s proprietary laminate analysis software. VectorLam Cirrus 2.0 provides a cloud-based, […]

Vectorply debuts new booth, products at IBEX 2015

Louisville, KY. – Vectorply Corporation recently participated in the International Boatbuilder’s Exhibition and Conference at the Kentucky Convention Center in Louisville, KY. The show, with the theme “Building Better Boats,” offered boat builders a chance to learn about the latest products and offerings in the marine market including Vectorply’s advanced composite reinforcements. At the show, Vectorply […]

Scout Boats’ 420 LXF made possible with Vectorply’s R2O

PHENIX CITY, Ala. – In a market as diverse as the United States marine market, Vectorply Corporation understands that each boat builder has unique goals they strive to achieve with individual projects or models. With a list of must-meet goals in hand, Scout Boats, Inc. turned to Vectorply to assist with laminate design and technical […]

Vectorply carbon helps UCF take 6th in ASME Human Powered Vehicle Challenge

GAINESVILLE, FL. – The University of Central Florida’s (UCF) human-powered vehicle team recently competed in the American Society of Mechanical Engineers (ASME) Human Powered Vehicle Challenge, East at the University of Florida. The UCF team claimed a sixth place finish while competing in a vehicle that featured Vectorply’s C-BX 0450 carbon fabric. According to their […]