Entries by Scott

Process Improvement Executive Position

Vectorply Corporation, a world leader in the design, manufacture and distribution of high performance composite reinforcement fabrics, has an immediate opening at its Phenix City, AL location for an experienced executive to lead the company’s continuous improvement initiatives. The job entails analysis of present methods and the development of new systems and procedures aimed at […]

Vectorply highlights VectorUltra line at CAMX, IBEX

Phenix City, Ala. – Each year Vectorply Corporation exhibits at the Composites and Advanced Materials Expo (CAMX) and the International Boatbuilders’ Exhibition & Conference (IBEX). This year the focus at both shows was their expanding advanced composite reinforcement line of VectorUltra products. At CAMX in Anaheim, CA Vectorply Director of Composites Engineering Trevor Gundberg, P.E. […]

Vectorply to highlight VectorUltra products at CAMX, IBEX

PHENIX CITY, Ala. – Vectorply Corporation will showcase its full VectorUltra™ line of carbon multiaxial fabrics September 26-29 in Anaheim, CA at the Composites and Advanced Materials Expo (CAMX) 2016. Vectorply’s standard VectorUltra products are offered in unidirectional, biaxial, double-bias, triaxial, quadraxial, and multilayered architectures ranging from 3 oz./yd.² (100 gsm) to 94 oz./yd.² (3,193 […]

Construction begins on Vectorply’s Advanced Composites Facility

PHENIX CITY, Ala. – Vectorply Corporation announced in February at the company’s National Sales Meeting that the addition of a new Advanced Composites Facility would begin during the spring. With the site preparation completed, foundation construction began this week as the first concrete footings were poured. Check back at www.vectorply.com for more news and updates about […]

Successful composite products begin with Vectorply’s R2O

Phenix City, Ala. – In an industry as competitive as composites fabrication, any edge that manufacturers can gain has the potential to pay huge dividends. As numerous customers have already discovered, Vectorply’s powerful tool known as the Road to Optimization (R2O) can identify key areas for improvement in the production process leading to higher quality […]

Vectorply composites strengthen Hale Boggs Memorial Bridge

Destrehan, LA – Spanning the Mississippi River to connect Destrehan on the east bank to Luling on the west bank, the Hale Boggs Memorial Bridge (also known as the Luling Bridge) is one of the state of Louisiana’s most crucial pieces of infrastructure.  With the bridge in need of surface repairs, the Louisiana Department of […]

U.S. Coast Guard marine inspectors train with Vectorply carbon

Richmond, CA – Maritime Technical Services of Tiburon, CA recently completed their 15th training course designed to teach United States Coast Guard marine inspectors how to inspect composite small passenger vessels.  The course is held three times a year at the KKMI Boathouse in Point Richmond, CA and consists of 20 students. The course covers several […]

VectorLam Cirrus 2.0 Introductory Webinar (video)

Vectorply Corporation Director of Composites Engineering, Trevor Gundberg, P.E. leads an introductory webinar for VectorLam Cirrus 2.0. Cirrus 2.0 is the latest edition of Vectorply’s proprietary laminate analysis software. View the video below for the full-length webinar, or follow the link on our home page to register for VectorLam Cirrus 2.0 for free! Note: For the […]